Company main products: pump valve     Tel:0550-7031888
RSS|Shopping Cart|Mobile Version|Chinese|English
ANHUI TIANMA PUMP VALVE GROUP CO.,LTD OF CHINA
免费服务热线

400-889-9558

13605505188 、18098329999

Contact / Contact
  • ANHUI TIANMA PUMP VALVE GROUP CO.,LTD OF CHINA
  • Tel:0550-7031888
  • Fax:0550-7321688
  • Email:sales@ahtmbv.com
  • Address:NO. 1 TIANMA ROAD ECNOMIC DEVELOPMENT ZONE OF TIANCHANG, ANHUI, CHINA
High voltage electric diaphragm pump, how to install?

High voltage electric diaphragm pump is a positive displacement pump, the electric motor as the power source, it has the advantages of self suction pump, shield pump, pump, submersible pump and other impurity pump and a front stage. Also do a variety of solid-liquid separation equipment device to send.
DBY series electric diaphragm pump factory production is a new type of electric diaphragm pump, BLY series cycloid reducer drive power, instead of the traditional turbine worm reducer. At the same time, because in recent years has made breakthrough progress. The diaphragm material for all kinds of corrosive liquid, with particles of liquid, high viscosity, easy to volatile, flammable, poisonous liquid can be pumped exhaust.
This pump is widely used in domestic petroleum and chemical industry, electronics, ceramics, textile system units, installed in a variety of special occasions, for pumping various conventional pumps can not pump the medium, the results were satisfactory.
High voltage electric diaphragm pump product application:
1 is suitable for household water pressure booster, car washing, ship Shanghai water desalination.
2 suitable for reverse osmosis pure water machine, water treatment equipment, filter, spray device, chemical liquid metering and sanitation, environmental protection, printing and other industries.
Guide for installation of high voltage electric diaphragm pumps:
1 installation, pulling out the sealing diaphragm pump import and export.
The 2 is attached with the pump import and export DP-130 DP-125 DP-100 joint, DP-60 type diaphragm pump import and export by ZG3/8 "G29/64" outer tooth elbow joint; DP-35 diaphragm pump import and export by 3/8 "outer tooth hose connections.
3 pump should be installed according to the level, such as the need for vertical installation, the pump head should be down.
4 in the pump inlet and outlet pipe to install a filter, which is the guarantee of effective use of the pump (DP-35 pump head has been equipped with a filter screen, no need to install the filter).
The base of the 5 pump nylon base, iron base rubber pin.

Return To The Top
  • ANHUI TIANMA PUMP VALVE GROUP CO.,LTD OF CHINA  Copyright © 2015  正版建站推广:千秋在线  皖ICP备15019806号-1  
  • Tel:0550-7031888  Fax:0550-7321688  Email:sales@ahtmbv.com
  • Address:NO. 1 TIANMA ROAD ECNOMIC DEVELOPMENT ZONE OF TIANCHANG, ANHUI, CHINA
  • 点击这里给我发消息
  • 点击这里给我发消息
  • 点击这里给我发消息
  • 点击这里给我发消息
  • 点击这里给我发消息